⚠ A COVID-19 Update from the Canon Service Team
Ij.start.canon TS3122
CANONN SUPPORT
Download Driver
Install into your System
Enter Your Model
Ij.start.canon TS3122
Canon Pixma TS3122 is an advanced Inkjet all-in-one Printer that is both tiny and powerful. This versatile and feature-rich wireless printing equipment is both powerful and versatile. Not only that, but it is really reasonably priced. However, without a fundamental setup step at “ij.start.canon ts3122,” this cutting-edge printing technology is unusable. This cutting-edge Printer unit simplifies wireless setup. The operation is straightforward and takes minimal time. Nonetheless, it goes into great detail about the procedures on a user-friendly web platform.
The ij.start.cannon ts3122 process has three basic steps. To begin, configure the hardware of your printer. Connect it to your wireless network and configure it from there. The Printer Driver Software must then be downloaded and installed.
Following the "ij.start.canon ts3122" Process, Unrivalled Features Are Now Available.
- Because of Airprint, it is compatible with your iPad and iPhone.
- The Canon Print App now allows you to print from any mobile device.
- Because of its wireless compatibility, it may be accessed from anywhere on the network.
- Prints borderless photographs up to 5″ * 7″ in a variety of sizes.
- The Rear Paper Support saves you time when replacing paper.
- It generates high-quality output thanks to the Fine Hybrid Ink System.
- Auto Power On/Off is included to allow you to access the printer straight from your mobile device.
- The Quiet Mode allows you to run its activities without being disturbed.
Canon Pixma TS3122 Hardware Installation
First and foremost, the Canon “ij.start.canon ts3122” technique requires that the Printer’s Hardware be properly configured. Because the printing machine is extremely sensitive, it must be handled with extreme care. To begin, locate a good position for your Printer. It must be within the coverage region of your Internet Network. In addition, the surface must be flat and smooth. After that, carefully unbox it by removing all of the packaging material, including the Red/Orange Tapes. Connect it to a reliable and constant power source after that. After that, turn it on. The “Power Lamp” lights when you press the Printer’s “Power” button.Check that it is stable and green in colour. Set up its “Paper Tray” and fill it with the appropriate kind of Paper Sheets. As a result, the Printer may make some noise as the Initialization and Alignment process begins. Then, navigate to its Control Panel. You must follow the Setup Guide to complete the “ij.start.canon ts3122” process.
Connect the printer to your network
Connect the Printer to a secure Wireless Network before continuing with the “ij.start.canon ts3122” process. This is essential in order to take advantage of the Printer’s numerous features. Nonetheless, this method is really convenient. It is vital, however, to ensure that your router has a WPS Push-button.
- Connect your Canon printers to a power supply and turn them on.
- Now, hit the “Power” button on your printer to turn it on. Check to see if its “Power Lamp” is properly lighted and stable.
- Then, on the printer, locate the Wireless button. Because it has the “Wireless” logo, this pushbutton is easily recognisable.
- Once you’ve discovered it, simply press and hold it. Before proceeding, you must wait for the matching Indicator Light to flash once. Then just let it go.
- After that, the Indicator Light will become blue.
- Then, locate the WPS Push-button on the Router. Keep it pressed for a few seconds. However, you must do it within two minutes of the prior action.
- As a result, your printer’s Indicator Lamp will begin to flicker. It indicates that the Printer is looking for a network that is within its range.
- As a result, the Printer’s “Power Lamp” and “Indicator Lamp” will begin to blink.
- You’ll have to wait for the Lamps to cease flashing as a result. They must, however, remain illuminated and stable.
- The printer searches for and connects to an available network to complete the “ij.start.canon ts3122” process.
- You must now confirm that the printer is connected to the suitable network. Simply perform a Test Print to accomplish this.
- Insert a blank sheet of A4 paper into the printer.
- Look at the “Resume” button on the printer. Then, push and hold it for a few seconds.
- As a result, the device’s “Indicator Lamp” will begin to flicker. Wait for it to blink for 15 seconds.
- Make an effort to count the same correctly.
- Then, release the button.
- As a result, you will receive the Network Details on a Printed Sheet.
- Examine the data to ensure that it contains the correct SSID Name for the “ij.start.canon ts3122” operation.
Download and Install Printer Driver Software
Unless the correct Printer Driver Package is installed, the “ij.start.canon ts3122” process is incomplete. First, you must download and install the software on your computer.
Download the Printer Driver
Begin by downloading the necessary Canon Printer Software for your Canon Pixma TS3122. Simply visit Canon’s official website at “canon.com/ijsetup.” Then navigate to its “Setup” page. Then, look for the Setup window for your TS3122 Printer Model. You will also need the operating system for your machine. To acquire the “Download” link, follow the remaining on-screen steps. Then, select “Download” to begin downloading the Driver Software.
Install the Printer Driver
To complete the “ij.start.canon ts3122” operation, proper installation is required. Locate and run the Printer Driver Software that you downloaded. To validate your system, select the “Run” option when the Security Prompt pop-up window opens. Then, in the resulting “User Account Control” window, click “Yes.” This will open the Welcome window of the Canon Printer Setup Wizard. It is a simple Installer Software that will guide you through the installation process step by step. As a result, carefully follow the instructions on the screen. This will require you to select your “Language” and “Place of Residence.” In addition, you must agree to the terms of its “Licence Agreement.” Furthermore, in the Firewall Settings box, select “Deactivate the Block.”
http //ij.start.cannon
This article includes step-by-step instructions for installing a Canon printer with http//ij.start.cannon mac setup. This technique is compatible with wired and wireless connections. Both Windows and Mac computers are aware of it. We used the http://ij.start.canon mac setup function to show how to set up a printer on a Mac.
Using IJ.Start.Cannon IJ Setup Guide for Windows (Wireless).
Follow these steps to connect your printer to a wireless network.
- To begin, navigate to http//ij.start.canon mac setup’ and enter the correct printer model number to download the driver for your Canon printer.
- After double-clicking the downloaded driver file from your system, follow the onscreen instructions.
- When a security warning pops up, tap the ‘Rub’ tab to allow the application to run on your system.
- By pressing the ‘Next’ button, select ‘Wireless LAN Connection.’
- Go to your Canon printer and hold down the WiFi button until the alarm lamp flashes twice, then release.
- Now, on the Canon printer screen tab, press the ‘Arrow Button’ to navigate to the ‘Menu’ and select ‘Device Settings.’
- Then go to Menu>Device Settings>LAN Settings>Wireless LAN Setup on the printer and press the ‘OK’ button.
- Your printer will now look for an access point on your router.
- From the printer screen, select your wireless network name and press the ‘OK’ button. Then, on the next screen, type in the WPA Key (WiFi password).
- Your printer must be on your wireless network in order to use IJ Startup Canon Setup.
Following that, we’ll look at how to check to see if your printer has been added to Windows for both wireless and wired connections.
- From the Windows search bar, open the ‘Run’ dialogue box and type ‘Control Panel’ before clicking the ‘OK’ button.
- Select the ‘Devices and printers’ option when the control panel appears.
- A ‘Green Tick Mark’ will appear if your printer has already been added.
- If your printer isn’t listed, select the ‘Add Printer’ option to manually add it.
- It will display a list of currently available printers. Press the ‘OK’ button after selecting your preferred Canon printer. In the ‘Device and Printer’ section, your Canon printer will appear with a ‘Green Check Mark’ after a few seconds.
- Finally, your Canon IJ printer is connected to your Windows system wirelessly.
Install Canon IJ Wired (USB) on Windows using Ij. Begin Canon
To connect your Canon IJ printer to your Windows system via a wired USB connection, follow the steps below.
- Turn on both the Canon printer and the computer.
- Follow the installation instructions for the Canon printer driver at http//ij.start.canon mac setup.
- Connect the USB cable to the printer on one end and the Windows PC on the other.
- To add a printer, go to Control Panel>Device settings>Add printer.
- Your printer is now operational.
Canon.com/ijsetup for Mac Printer Installation (Wireless)
You can get started with the http//ij.start.Canon mac setup by following the steps below –
- Press ‘Enter’ after typing canon http//ij.start.canon mac setup into your browser.
- Select the model and operating system for your Canon ij Printer (MAC)
- To open the file, double-click it after saving it to your computer.
- Follow the steps in the first section of this article to connect your Canon IJ printer to a WiFi network.
- Then, go to the “Apple” menu and choose “System Preferences.”
- After that, choose ‘printers and scanners.’
- Click the ‘+’ sign to add a printer. The name of your printer will be displayed in a pop-up window on the screen.
- Select a printer and click the ‘Add’ button to manually add it.
- In a matter of seconds, your printer will be added to your Mac computer via wireless connection and will be ready to use.
Procedures for Hardware
- You must first complete the hardware setup process on your device before proceeding with the setup.
- Unbox your printer exactly as directed in the video guide found on the internet.
- Turn on your printer after connecting it to the power supply with the power cable.
- In the control panel, save the printer’s basic settings, such as language, date, location, and time.
Conclusion
In this article, we went over how to set up a Canon printer and use its services. We also discussed how to easily connect a Canon printer to a Windows or Mac device using a USB cable or a wireless connection. Furthermore, we have detailed instructions for each step of the http//ij.start.Canon mac Setup. If you continue to have trouble configuring your printer, please contact us via our toll-free helpline.
Frequently Asked Questions
Important Reset Procedures for the Canon TS3122 Printer
- Start your Canon printer and go to the main menu.
- To get to the setup menu options, use the directional arrows.
- Navigate to “DEVICE SETTINGS,” then click the “OK” button.
- Finally, click OK to start the procedure by selecting “RESET SETTINGS.”
Make certain that the printer is correctly plugged in. Verify that the printer is properly connected to the computer. Check that your paper settings match the information for the rear tray.
Connectivity via WPS
- Check sure the button on the wireless router is ready to be pressed.
- Hold down the Network button (A) on the printer until it flashes (B), then release it.
- Press and hold the WPS button on the wireless router for 2 minutes.
- When the wireless router connection has been established.
Press and hold the WPS button on the router for 3-5 seconds. Your router’s WPS light will then begin to blink. It will just take a few minutes to connect the Canon TS3122 printer to WiFi. If the connection is successful, the Wireless Icon with Signals will appear on the printer’s digital screen.